Controlling the volume
To control the volume of an audio component (CD, MD, TAPE)
Press 2 +/– to control the volume, and 
to mute on the amplifier.
Example
When you press 2 +/– at “CD,” you can control the volume of the amplifier.
You can change this setting also (page 15).
To control the volume of a visual component (SAT, VCR, DVD)
Press 2 +/– to control the volume, and 
to mute on the TV.
Example
When you press 2 +/– at “VCR,” you can control the volume of the TV.
You can change this setting also (page 15).
Note
If you have programmed any signal on the 2 +/– or 
button for “TV” or “AMP” using the Learning function (page 15), that signal will not be transmitted when you control other components. To use “learned” signals, you need to program the 2 +/– or 
buttons for each component using the Learning function.
Operating Non-Preset Components
— Learning Function
To operate
It is recommended that you make a note of the “learned” function controls.
Note
Some specific remote control signals may not be “learned.”
Programming a component signal
Jog dial
2
Continued
