Note
If you don’t input anything into the Commander for over 30 seconds between each step, the Commander exits SET mode.
Tips
•If you press the Jog dial at “EXIT” on each menu, the Commander returns to the top of the previous mode.
•If you press SET at any point during this operation, the settings to which “OK” have been displayed to this point are saved, and the setup procedure is cancelled. Start over from Step 2.
Setting by searching
You can find a code number available for a component that doesn’t have one in the supplied “Component Code Numbers.”
Before starting to search
Set each component to the following status so that the Search function works effectively.
TV:
SAT, VCR, DVD, AMP:
CD, MD, TAPE:
2
Jog dial
2
Tip
You can also press b/B instead of turning the Jog dial to the left/right. You can also press OK instead of pressing the Jog dial.
Continued
