Operating Non-Preset
Components
— Learning Function (continued)
3Press the Jog dial again.
“DEL OK” appears in the display, and the component name flashes again.
Advanced Features
Changing the
Component Selection
Order (MOVE)
At the factory, the Commander is preset to change the component in the following order. However, you can change the order as you like.
DEL
OK
LEARN
S-3
VCR 
LEARN
Note
In some cases, a processing indicator (see Notes on page 22) might appear in the display. Wait until this indicator disappears.
4Select “EXIT,” then press the Jog dial to finish erasing.
To exit SET mode, press SET.
TV 
SAT 
VCR 
DVD
AMP 
TAPE 
MD 
CD
Jog dial
1
Tip
You can also press b/B instead of turning the Jog dial to the left/right. You can also press OK instead of pressing the Jog dial.
