Features
The
Centralised control of Sony AV components with this one remote commander
This Commander is preset at the factory to operate Sony brand components, so you can use it out of the box as a control centre for your Sony AV components.
Remote control signals for
This Commander is preset for most major brands components including Sony. You can remote control your components by setting their code numbers (page 8).
Learning function for programming other remote control signals you need
This Commander has a Learning function, to “learn” remote control signals to operate
In addition, the Commander can “learn” remote control signals (infrared signals only) of
(page 18).
Reassigning new components
You can assign Setting position numbers to freely operate other components. This is useful when you have more than two of the same kind of AV components (page 8).
LCD display and Jog dial for easy monitoring and operation
This Commander has an LCD display that shows the current component to operate, or the current status during setup (page 7). With the Jog dial, you can easily select a function to operate, or confirm a setting at various setup procedures (page 7).
Customisable function display
You can freely change the names of components as you would want to call them on the display (page 26).
Universal remote commander of
We carefully designed this universal Commander so that it coordinates with your living room interior.
The CE mark on the unit is valid only for products marketed in the European Union.
4GB
