![](/images/new-backgrounds/1225266/22526641x1.webp)
Changing or erasing the function of a “learned” button
To change the “learned” function, erase it first and perform Learning again.
To erase the “learned” function of a single button
4,5
Jog dial
Tip
You can also press b/B instead of turning the Jog dial to the left/right. You can also press OK instead of pressing the Jog dial (except for the following Steps 4 and 5).
Example: To erase the “learned” function from the VCR Number button 1
1Follow Step 2 on page 16 to go to the LEARN mode.
2Turn the Jog dial to select the Setting position number
The component name flashes in the display.
S-3
VCR ![](/images/new-backgrounds/1225266/22526641xi7.webp)
LEARN
Note
If you have changed the name of the component (page 26) that name is displayed.
3Turn the Jog dial to select “DEL,” then press the Jog dial.
“DEL” appears in the first row, and “KEY?” flashes in the display.
DEL![](/images/new-backgrounds/1225266/22526641xi10.webp)
![](/images/new-backgrounds/1225266/22526641xi11.webp)
![](/images/new-backgrounds/1225266/22526641xi12.webp)
KEY? ![](/images/new-backgrounds/1225266/22526641xi14.webp)
L![](/images/new-backgrounds/1225266/22526641xi15.webp)
EARN![](/images/new-backgrounds/1225266/22526641xi17.webp)
![](/images/new-backgrounds/1225266/22526641xi18.webp)
Continued