Sony RM-VZ950T Setting the Component Codes, Setting by entering the code number

Basic Operations

Setting the Component Codes

The Commander is preset at the factory to operate Sony brand AV components (see the table below). You can use the Commander with other preset AV components also. If you are using the Commander with a factory-set Sony component, skip the following procedures.

To use with other AV components, you need to follow the procedures to set the correct codes for each component.

You can set 8 different components to 8 Setting position numbers (S-1 to S-8).

Setting	Display	Factory setting
position
number
S-1	TV	Sony TV
S-2	SAT	Sony SAT
	(Satellite tuner)
S-3	VCR	Sony VHS
	(Video player)	VCR
S-4	DVD	Sony DVD
		player
S-5	CD	Sony CD
		player
S-6	MD	Sony MD deck
S-7	TAPE	Sony cassette
	(Cassette	deck
	deck*)
S-8	AMP	Sony amplifier
	(Amplifier)

* Analog audio compact cassette deck

Note

See “Table of Preset Functions” (page

38)for the functions of buttons as for each component.

Setting by entering the code number

7

Jog dial

2

Tip

You can also press b/B instead of turning the Jog dial to the left/right. You can also press OK instead of pressing the Jog dial.

8GB