SAT
VCR
KEY
qa1
31 – 9, 0
5RED,
GREEN,
YELLOW, BLUE
2t
qsa (EPG)
1/ (GUIDE)
qd2- (EXIT)
7MENU
6v |
6V |
FUNCTION
To turn the power on/ off.
To change the programme. Also to turn on.
To select
Works in the same way as the TV’s commander.
Fastext buttons
To switch the output of the SAT receiver to the TV*.
To turn the EPG display on/off .
To bring up Master Guide.
To exit the mode.
To call up the MENU display.
To move the cursor upward.
To move the cursor downward.
KEY
qa1
31 – 9, 0
2t
6m
6N
6M
7z
6x qfX
qgPROGR +/–
qd2-
FUNCTION
To turn the power on/ off.
To change the programme. Also to turn on.
To select the input source. The source changes each time you press the button.
To rewind.
To play.
To
To record, press N while pressing z**. First release N, then release z.
To stop.
To pause.
Programme up: +
Programme down: –
To select a number between 20 and 29.
To select
Works in the same way as the VCR’s commander.
6B |
6b |
qfOK
qgPROGR +/–
qh
To move the cursor to the right.
To move the cursor to the left.
To bring up the Station Index when a program guide is not displayed.
To select the programme that is highlighted.
Channel up: +
Channel down: –
To operate JUMP, FLASHBACK or
PROGRAMME RETURN function on the SAT depending on the setting of the SAT’s manufacturer.
**You can assign this operation to a single button (z) using the Learning function (page 15).
*When you connect a TV cable or antenna to the SAT, the output switches between the TV and SAT programme.
Continued
