![](/images/new-backgrounds/1225266/22526657x1.webp)
To reset the name of the component back to the initial factory preset
Jog ![](/images/new-backgrounds/1225266/22526657xi3.webp)
![](/images/new-backgrounds/1225266/22526657xi4.webp)
dial
Example: To reset the changed name at
1Follow Steps 1 to 2 on page 27. Then turn the Jog dial to select “INIT.”
“INIT.” flashes in the display.
S-3
INIT. ![](/images/new-backgrounds/1225266/22526657xi13.webp)
NAME
2Press the Jog dial.
The factory preset component name of the selected Setting position number flashes in the display.
Tip
You can also press b/B instead of turning the Jog dial to the left/right. You can also press OK instead of pressing the Jog dial.
S-3
VCR ![](/images/new-backgrounds/1225266/22526657xi25.webp)
NAME![](/images/new-backgrounds/1225266/22526657xi27.webp)
![](/images/new-backgrounds/1225266/22526657xi28.webp)
If you want to reset the names for other Setting position numbers, turn the Jog dial to select “EXIT,” press the Jog dial, and repeat from Steps 1 to 2.
3Select “EXIT,” then press the Jog dial to finish setting.