Sony RM-VZ950T operating instructions Preset, Example To set up a Philips’ TV at S-1/TV

Example: To set up a Philips’ TV at “S-1/TV”

1See the tables in the supplied “Component Code Numbers,” and find the three-digit code number for the desired component.

If more than one code number is listed, use the number that is listed first.

For example, to set up a Philips’ TV, you would use the code number 086.

2Press SET.

“PRESET” flashes in the display, and the Commander changes to SET mode.

4Turn the Jog dial to select the Setting position number (“S-1” to “S-8”).

Each time you turn the Jog dial, the display changes as follows.

S-1	S-2	S-3	S-4 S-5
TV	SAT	VCR	DVD	CD

S-8 S-7 S-6

EXIT AMP TAPE MD

Notes

•If you have changed the names of the components (page 26) those names are displayed.

•If you press the Jog dial at “EXIT,” the Commander returns to the top of SET mode (Step 2).

5Press the Jog dial.

The component name flashes in the display.

PRESET

SET

3Press the Jog dial.

The Setting position number flashes, and the component name appears in the display. The Commander changes to the Component PRESET mode.

S-1

TV

PRESET

Note

If you have changed the name of the component (page 26) that name is displayed.

S-1

TV ¢￿¢￿1

PRESET

Note

The component names displayed at this point represent the type of the component to operate. These names cannot be changed.

If you want to set a different component to this Setting position number, turn the Jog dial to select the desired component. The display changes as shown below.

TV SAT VCR DVD CD

EXIT AMP TAPE MD

Continued

9GB