![](/images/new-backgrounds/1225266/22526649x1.webp)
Example: To move “VCR” between “TAPE” and “AMP”
1Press SET, turn the Jog dial to select “MOVE,” then press the Jog dial.
The Commander changes to the MOVE mode.
3Turn the Jog dial to select a component in front of where you want to set the selected component.
While you scroll through the menu, all other component names also flash rapidly.
In this example:
Select “AMP.”
TV
MOVE |
| AMP |
|
| |
Note |
| MOVE |
|
| |
If you have changed the name of |
|
|
the component (page 26) that name |
|
|
is displayed. |
| 4 Press the Jog dial. |
|
| |
2 Turn the Jog dial to select |
| “OK” appears in the display |
the desired component you |
| for one second. The component |
want to move, then press |
| selection order is fixed, and the |
| previously selected component | |
the Jog dial. |
| |
| name flashes again. | |
The selected component name |
| |
|
| |
flashes rapidly. |
|
|
OK
VCR
MOVE
MOVE
VCR ![](/images/new-backgrounds/1225266/22526649xi10.webp)
MOVE
Continued