Example: To change “VCR” to “SONYDV”
1Press SET, turn the Jog dial to select “NAME,” then press the Jog dial.
The Setting position number flashes, and the component name appears in the display. The Commander changes to the NAME mode.
TV
NAME
Note
If you already have changed the name of the component, that name is displayed.
Tips
•It is recommended that you look at your note on the component code list when write the names.
•If you press the Jog dial at “EXIT”at any point during operation, the Commander returns to the previous mode.
2Turn the Jog dial to select the component name you want to change, then press the Jog dial.
The component name flashes in the display.
S-3
VCR 
NAME
If you want to change the name of the amplifier’s input source, press the Jog dial again.
The input source name flashes in the display.
AMP
VIDEO1
NAME
3Press the Jog dial.
A cursor flashes on the first character of the component name.
S-3
VCR
NAME
4Turn the Jog dial to select a desired character.
The selected character and the cursor flash in turn.
S-3
SVCR
NAME
Continued
