Toshiba 32AF13 owner manual Selecting the signal source, Programming channels into the TVÕs memory

Selecting the signal source

Use the TV/VIDEO button on the remote control or TV to select the signal source connected to your TV.

To change the signal source:

Using the remote control: Press TV/VIDEO on the remote control, and then press the corresponding CHANNEL NUMBER for the desired source (see the illustration below).

Using the remote control or TV: Repeatedly press TV/VIDEO until the selected signal source displays in purple.

0:TV

1:VIDEO 1

2:VIDEO 2

3:VIDEO 3

4:ColorStream

TV Front Panel

RECALL MUTE

o

POWER

RECALL

Welcome to Toshiba

Connecting your TV

To verify the signal source:

Press RECALL or press TV/VIDEO on the remote control once.

Programming channels into the TVÕs memory

When you press CHANNEL ▲ ▼ on the TV or remote control, the TV stops only on the channels stored in the TV’s memory.

Note: To tune the TV to a channel not programmed into the memory, use the CHANNEL NUMBERS on the remote control.

Follow the steps below and on the next page to program channels into the TV’s memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in the TV’s memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 18).

To program channels automatically:

1.Press MENU.

2.Press x or • to highlight the SET UP menu.

3.Press y or z to highlight TV/CABLE.

4.Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable).

5.Press z to highlight CH PROGRAM.

1 2 3

4 5 6

7 8 9

CH RTN

100 0 ENT

CH

VOL MENU/ VOL

ENTER

CH

TV

CABLE

VCR EXIT

FAV CH TV/VIDEO

A

REC TV/VCR STOP PLAY

STILL SOURCE PIP

SLOW PAUSE REW FF

PIP CH LOCATE SWAP

CT-90037

CHANNEL NUMBERS

MENU

yz x •

CHANNEL

yz

TV/VIDEO

Using the Remote Control

Setting up your TV

Using the TVÕs Features

SET UP				SET UP
LANGUAGE:				LANGUAGE:
	[ENGLISH] FRANCAIS ESPANOL				[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:		[TV] CABLE		TV/CABLE:		[TV] CABLE
CH PROGRAM				CH PROGRAM
ADD/ERASE:		[ADD] ERASE		ADD/ERASE:		[ADD] ERASE
MORE				MORE
MOVE [	]	SELECT [	]	MOVE [	]	SELECT [	]

6.Press x or • to start automatic channel programming (“CH PROGRAM” displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV’s memory.

7.When automatic channel programming is complete, the message “CH Programming Completed” appears.

8.Press CHANNEL ▲▼ to view the programmed channels.

Appendix

17