Using the Remote Control
Learning about the remote control
Only the buttons used for operating the TV are described here.
POWER turns the TV on and off.
SLEEP allows access to the automatic TV
LIGHT The first press of the LIGHT button lights the keypad and turns on the Illumination mode. With the Illumination mode on, pressing any other key lights the keypad for 5 seconds (10 seconds if the remote control is in programming mode). Subsequent presses of the LIGHT button toggle the Illumination mode on and off.
Channel Numbers
MODE cycles through the six device modes (TV, CABLE/SAT, VCR, DVD, AUDIO1, AUDIO2). The mode indicator will remain lit for 10 seconds.
FAVORITE allows access to the
INFO allows access to
MENU allows access to
ENTER sets programming menu information (page 21).
yz x • Buttons select or adjust programming menus (page 21).
(FAV) x • Buttons select your favorite channels (page 25).
VOL yz adjusts the volume level.
EXIT exits programming menus (page 21).
CH yz cycles through programmed channels (page 24).
CH RTN returns to the last viewed channel (page 25).
TV/VCR toggles between TV and VCR modes.
RECALL displays
MUTE mutes the sound (page 42).
INPUT selects the video input source (page 39).
PIP Buttons allow access to PIP functions (page 28).
PIP turns the PIP on and off.
PIP CH yz selects the PIP channel.
MULTI allows access to the
STILL freezes the PIP picture.
SWAP switches the main and PIP pictures.
LOCATE changes the position of the PIP picture.
SOURCE selects the PIP signal input source.
AM/FM
DISC
20 32/36AFX61(E)