Setting up your TV

Adding and erasing channels manually

After you have programmed the channels automatically, you can manually add or erase specific channels.

To manually add or erase channels:

1.Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight ADD/ERASE.

SET UP

 

LANGUAGE

ENGL I SH

CLOCK SET

 

ANT 1 / 2

ANT1

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD / ERASE

T I LT CORRECT I ON

+ 0

4.Press x or • to select ADD or ERASE, depending on the function you want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Adjusting the tilt correction feature

When you install the TV or change the direction of the TV, the picture may become tilted because of the earth’s magnetic field. If this happens, make the following adjustment.

To adjust the tilt correction:

1.Press MENU, and then press x or • until the SET UP menu appears.

2.Press y or z to highlight TILT CORRECTION.

3.Press x or • to correct the picture tilt between +10 and –10.

SET UP

 

LANGUAGE

ENGL I SH

CLOCK SET

 

ANT 1 / 2

ANT1

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD

T I LT CORRECT I ON

+ 7

Changing channels

To change to the next programmed channel:

Press Channel y or z on the TV or remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100).

For channels 100 and higher, press the 100 button and then the next two numbers. For example, to select channel 125, press 100–2–5.

DEMO

MENU TV/VIDEO

VOLUME

CHANNEL

MENU

x •zy

 

Channel zy

Channel

Numbers

MENU

yzx •

Channel yz

24 32/36AFX61(E)