Toshiba 32SL410U, 24SL410U Connecting a stereo audio system, Connecting a digital audio system

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a

*Dolby® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an

external Dolby® Digital decoder or other external audio system with optical audio input.

You will need:

•Optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini-optical” connector.)

Dolby Digital decoder or other digital audio system

	Optical
TV back panel	audio
	cable

To control the audio:

1	Turn on the TV and the digital audio device.
2	Press	on the TV’s remote control and open
	the Sound menu.

3 Highlight Audio Setup and press.

Sound

Digital Audio Selector

Audio Settings

Audio Setup

4 In the Optical Output Format field, select either

Dolby Digital or PCM, depending on your device ( "Selecting the optical audio output format" on page 39).

Audio Setup

PC Audio	No
HDMI 1 Audio	Auto
MTS	Stereo
Language	English
Optical Output Format	Dolby Digital
Dolby Digital	Compressed
Dynamic Range Control

Note:

•Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.

•The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.

*Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.

Connecting a stereo audio system

With the TV’s analog stereo audio output terminals, you can connect the TV to a stereo audio system that is equipped with analog stereo audio input terminals.

You will need:

•One stereo RCA to RCA audio cable

TV back panel

Stereo audio system

Stereo RCA to RCA

audio cable

Note: The audio signal from this output is always available. However, the volume is fixed and can only be controlled by the stereo audio system connected.

ResetDone

18