Toshiba 42TL515U, 32TL515U, 47TL515U manual Skipping channels, Skipping video inputs, Manual Tuning

Chapter 5: Setting up your TV

1 > Settings > SETUP > Auto Tuning > OK . A confirmation screen appears.

2Press OK to start Auto Tuning or to abort.

The TV cycles through all the channels and stores all active channels in memory.

To view the programmed channels, press CH or CH .

Manual Tuning

After storing channels in memory, you can manually enter channels if the channel number is known.

1 > Settings > SETUP > Manual Tuning > OK .

2Use buttons 0–9 on the remote control to enter the channel number (for example, 56). Press OK .

3Press OK to start Manual Tuning.

The channels found are listed at the center of the screen.

Type	Description
ATV	Analog channel.
DTV	Digital channel

Skipping channels

To prevent a channel from being viewed, you can set it to be skipped.

1 > Settings > SETUP > TV Settings > OK .

2Press B or b to select Channel Options. Press OK . The list of channels appears.

Channel Options

Ch.	Type	Label
5-1	DTV
6	ATV
6-1	DTV
8	ATV
9	ATV
10	ATV
11	ATV
12	ATV

3 Move to the 8 column. Press B or b to select a channel to skip. Press OK . The box is selected. To clear the selection, press OK .

Note: You cannot tune skipped channels using CH or CH . Use buttons 0–9 and - on the remote control.

Skipping video inputs

You can set video inputs to be skipped when selecting inputs in the Input selection window.

To turn on skip:

1 > Settings > PREFERENCES > AV Connection > OK .

2Press B or b to select Input Labeling. Press OK .

3Press B or b to select the item you want to be skipped. Press the RED button to turn on Skip.

To turn off skip:

Press again the RED button to turn off Skip.

31