Toshiba 32ZP18P, 36ZP18P owner manual Timer, Stereo and Bilingual transmissions…, …and Bilingual

ADDITIONAL FEATURES

The timer, time display, panel lock and stereo/bilingual transmissions

The Timer Panel Lock

You can tell the TV to turn itself ON or OFF after a

certain time.

1 Select the TIMER option from the top menu bar.

TIMER

		Off timer		00:00
		On timer		01:30 P02
	0-9		: To set
		EXIT	: To exit
2	Select the On timer (or the Off timer). If, for
	example, you want the TV to turn ON (or OFF) in
	one and a half hours time, enter 01:30 using the
	numbered buttons on the remote control.
3	When setting the On timer, you must enter the
	programme position number you want to watch.

You must put the set into Standby mode by pressing the ibutton.

Any equipment connected with Scart leads must also be put into Standby mode to prevent them being displayed when the timer switches on.

When the On timer has been set, the GREEN On timer indicator on the front of the TV will be lit (see page 6).

If
the On timer has been
set, you do not have to
wait to watch the
television. You can bring the set
back to life by pressing the
ibutton.
the GREEN timer light	However,
will stay on until the set
time period has
passed, at which point the TV
will go
to the chosen channel.

4 To cancel the On timer, enter zero in each position including the programme position.

Panel lock allows you to disable the buttons on the front of the TV set. You can though, still use all of the buttons on the remote control.

1	From the FEATURE MENU select Panel
	lock and choose ON or OFF with the

Sor R buttons.

FEATURE MENU

AV connection							▼
Picture size/position							▼
Teletext							▼
Surround set up							▼
Language				▼	ENGLISH		▼
Panel lock				▼	ON		▼
WSS				▼	ON		▼
When Panel lock is				▼
			ON, you will be reminded			on the
screen when you
		press any of the front
Once the					panel buttons.
	set has been switched off
brought out of standby				it can ONLY be
			using the remote control.

Stereo and Bilingual transmissions…

If stereo or dual language broadcasts are transmitted the lights on the front of the TV will be lit. The word Stereo or Dual will appear on the screen, disappearing after a few seconds. The display will reappear each time you change programme positions, provided that the broadcast is in stereo. If the broadcast is not in stereo the word Mono will appear.

	NICAM, MPX
Stereo…	broadcasts	can
	be in either
	Stereo
	or Mono.

1	Choose the required programme number.
2	Press the OI/II button repeatedly, to select
	between Stereo and Mono.

The Time Display		…and Bilingual
The time display facility allows you to see the		Bilingual transmissions are rare. If they are
current time on the TV screen.		transmitted the word Dual will display.
If you press the F button and the tbutton on the	1	Choose the required programme number and if
remote control whilst watching a normal TV broadcast		the word Dual does appear press the OI/II
you will see a time display from the broadcaster.	21	button to select between Dual 1, Dual 2 or
It will remain on the screen for about 5 seconds.		Mono.