JVC HR-VP646U manual To timer-record a regular TV program received on the VCR, Catv

MENU

2 2

q 5/8 6

OK

6

7

8

EN41

MAKE CORRECTIONS

To change any of the settings, press OK or SHUTTLE PLUS Þ% until the item you want to change begins blinking. Then set as in step 5.

RETURN TO NORMAL

SCREEN

Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen (☞ pg. 43).

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.

NOTES:

1 2 3

4 5 6

7 8 9

0

TIMER

CH

1 3 Á

¦ 7 8

4¢

MENU SHUTTLE PLUS

OK

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.

●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

●If you enter a start time that has already passed, "ERROR" appears on the screen and blinks.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable or satellite channels through an external tuner, be sure to keep the cable box or satellite receiver's power ON.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless "DBS RECEIVER OUTPUT" is set to "OFF" ☞ pg.21), the BAND indication (TV or CATV or DBS) appears to the right of the channel number display. If the channel number that has been entered requires that the band be set, the BAND indication starts blinking:

a- TV	: To timer-record a regular TV program received on the VCR.
b- CATV	: To timer-record a cable TV program received on the VCR, or through a cable box (unless
	"CABLE BOX OUTPUT" is set to "OFF" ☞ pg.16).
c- DBS	: To timer-record a satellite program received through a DBS receiver.

Press CH 5° or SHUTTLE PLUS %Þ to select the appropriate band, then press OK.

●If "BAND" is set to "TV" at the Band screen (☞ pg.13), CATV will not be displayed on the Program screen; if it is set to "CATV", TV will not be displayed.

PROGRAM 1
DATE	12/24 WED
START	12:00 PM
STOP	1:00	PM
CHANNEL	110	DBS SP

PRESS NUMBER KEY (O–9) OR (5,°), THEN (OK)

PRESS (MENU) TO END