50
EN
SPECIAL
FEATURES
(cont.)
DBS Receiver Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands of DBS (Direct Broadcast Satellite) receivers listed below.
CABLE/DBS 
MBR SET
POWER
1 2 3
4 | 5 | 6 | NUMBER |
7 8 9
0
CH
1
2
TURN ON THE DBS
RECEIVER
Turn the power on using the DBS receiver's remote control.
ENTER DBS RECEIVER BRAND
While holding down CABLE/DBS on the VCR’s remote control, press MBR SET and use the NUMBER keys to enter the DBS receiver brand number from the chart
1
3 
Á
¦ 7 8
STOP
4¢
3
below and then press STOP. Follow the example shown below.
●Once you have set the remote control to operate the DBS receiver, you don't have to repeat this step until you replace the remote control's batteries.
OPERATE DBS RECEIVER
First, while holding down CABLE/DBS, press POWER to see if the DBS receiver's power goes off as it should. If it does, try other functions.
●To operate your DBS Receiver, while holding down CABLE/DBS, press the corresponding button: POWER, CH5°, NUMBER keys (or ENTER).
●Depending on the DBS receiver you may have to press ENTER after having pressed the NUMBER keys.
(Ex.) To set remote control to RCA (DSS):
CABLE/DBS MBR SET | 8 DAILY | 0 AUX | 7STOP |
|
|
| Release |
Hold | Press in succession |
| |
down |
|
|
|
NOTES:
●Depending on the type of DBS receiver, there may be cases where some or all functions cannot be operated using the remote control.
●Though ECHOSTAR has a number of different remote codes, this remote control is applicable only to one of those codes preset at the factory.
●It's not possible to set the remote control for both your cable box and your DBS receiver at the same time; you can only set the remote control to the brand of either one.
DBS BRAND NAME | BRAND CODE |
|
|
RCA (DSS) | 80 |
SONY (DSS) | 81 |
PRIMESTAR | 90 |
ECHOSTAR | 91 |
|
|
