JVC HR-VP646U manual Troubleshooting, Cassette gets stuck partway

52EN

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair.

POWER
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	The power won’t come on.	● The power cord is disconnected.	Connect the power cord.
2.	The clock works, but the VCR’s	● The TIMER mode is engaged with	Press TIMER to disengage.
	power won’t come on.	Auto Timer set to "OFF" (☞ pg. 43).
		● The Child Lock mode is engaged.	Press and hold POWER on the remote
			to disengage the mode (☞ p. 51).
3. The remote control won’t function.		● The batteries are discharged.	Replace the dead batteries with new ones.
TAPE TRANSPORT
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1. The cassette gets stuck partway		● The cassette was inserted incorrectly.	Make sure the window side is up, the
	during loading, and is ejected.		rear label side is facing you and the
			arrow on the front of the cassette is
			pointing towards the VCR. Then insert
			the cassette.
2. The tape stops during rewind or		● The Counter Memory indicator (“M”)	Press C.MEMORY to disengage the
	fast forward.	is lit on the front display panel.	Counter Memory mode and extinguish
			the indicator.
PLAYBACK
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1. The tape is running but the picture		● If you’re using the RF OUT connec-	Set the channel selector to channel 3
	won’t appear.	tion (☞ pg. 6), the channel selector	or 4.
		on the TV is set incorrectly.	Set the TV receiver to its AV mode.
		● If you’re using the AV connection
		(☞ pg. 6), the TV receiver is set to
		the wrong mode.
2. Noise appears during visual search.		● This is normal.
3. Breaks are noticeable in Hi-Fi		● Automatic tracking is engaged.	Engage and adjust tracking manually
	soundtrack.		(☞ pg. 26).
4. The playback picture is blurred or		● The video heads may be dirty.	The heads must be cleaned. Consult
	interrupted, even though TV		your JVC dealer.
	broadcasts are clear.
5. The Hi-Fi soundtrack cannot be		● The AUDIO MONITOR option at the	Set AUDIO MONITOR to "HI-FI"
	heard.	Function Set screen was set incorrectly.	(☞ pg. 29).
RECORDING
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Recording won’t start.	● There’s no cassette loaded.	Insert a cassette.
		● The loaded cassette has had its	Remove the cassette and cover the hole
		record safety tab removed.	with adhesive tape, or load a cassette
			on which the record safety tab is intact.
2. TV broadcasts won’t record		● The VCR has been set to its AUX	Set the VCR to the appropriate
	properly.	mode by mistake.	channel.
3. Tape-to-tape editing won’t work.		●The VCRs or the camcorder and the	Refer to the directions and the illustration
		VCR have been incorrectly con-	under “Edit To Or From Another VCR”
		nected.	(☞ pg. 45) or “Edit From A Camcorder”
			(☞ pg. 46) and properly connect the
		● The power to one or more of the	units.
			Make sure the power to all units is on.
		units has not been turned on.
		● The recorder’s input mode has been	Set the recorder’s input mode to AUX
		set incorrectly.	and select "FRONT" or "REAR" at the
			Aux Input Screen (☞ pg. 47).