JVC HR-VP646U manual VCR Plus+ Timer Programming, Check Input Data, EN Timer Recording

PRESS (8=DAILY, 9=WEEKLY SP/EP=REC SPEED)

PRESS (MENU) TO END

38ENTIMERRECORDING

VCR Plus+

Timer

Programming

●Before VCR Plus+ Timer programming, see "VCR Plus+ Setup" on page 18.

●Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

2 2

q 5/8 6

Timer recording allows you to program the VCR to automatically record a program which will be broadcast at some future time.

The timer record function can be programmed using VCR Plus+ or On-Screen Timer Programming. (☞ pg. 38 or 40)

1		LOAD A CASSETTE
		Make sure the record safety tab is present.
		● The VCR’s power comes on automatically.
2		ACCESS VCR PLUS+ SCREEN
		Press MENU on the remote		VCR PLUS+
		control.
		● The clock must be set in
		order to access the VCR
		Plus+ screen. If you
		haven’t set the clock, the
		Main Menu screen	PRESS NUMBER KEY (0-9)
		appears when you press	PRESS (MENU) TO MAIN MENU
		MENU. Refer to page 7
		for the Plug & Play procedure or page 9 for the clock
		setting procedure.
		ENTER PLUSCODE NUMBER
		Press the appropriate NUMBER keys to enter the
	PlusCode number printed in the TV listings for the TV
3 program you wish to record.
		● To make corrections, press CANCEL and input the
		correct PlusCode number.
		● If the PlusCode number you input is incorrect,
		"ERROR" may appear on the screen to advise you of
		the error. This happens when the PlusCode number is
		for a program which has already passed. "ERROR" is

NUMBER "8"

CANCEL

1 2 3

4 5 6 NUMBER

7 8 9 NUMBER "9"

0SP/EP

displayed for about 4 seconds and the VCR Plus+

screen reappears (step 2).

CHECK INPUT DATA

Press OK and the Program		PROGRAM 1
screen appears.
		(VCR PLUS+ 12345678)
4 The PlusCode number you	DATE		12/24 WED
	START		12:00 PM
entered appears in the	STOP		1:00 PM
Program screen. Check to
	CHANNEL		40 SP
make sure it’s accurate.

1 3 Á

¦ 7 8

4 ¢

MENU

OK

● To timer-record daily or weekly serials, press

DAILY (NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes each corresponding display disappear.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the VCR Plus+ screen, input the correct PlusCode number.

SET TAPE SPEED

5 Press SP/EP.