JVC HR-VP646U manual Select Time Zone, Select D.S.T. Mode, Make Corrections, Manual, Auto

D.S.T. SELECT

=AUTO

ON

OFF

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

TIME ZONE SELECT =ATLANTIC

EASTERN

CENTRAL

MOUNTAIN PACIFIC ALASKA HAWAII

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

TIME ZONE SELECT

=AUTO

MANUAL

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

SELECT TIME ZONE

8 You can select the zone automatically or manually

by pressing CH▲▼ or SHUTTLE PLUS %Þ. If an

incorrect time is displayed you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an

incorrect PBS channel from a cable TV system. If you selected "AUTO" in step 7 select "MANUAL" and select the correct time zone manually.

● If you selected "AUTO", press MENU to return to the Semi-Auto Clock Set screen.

● If you selected

"MANUAL", press OK and the screen to the

right appears. Move the highlight bar (arrow) to your choice by pressing CH▲▼ or SHUTTLE PLUS %Þ, then press MENU twice to return to

the Semi-Auto Clock Set screen.

SELECT D.S.T. MODE

9 You have three choices: a–Select “AUTO” and the adjustment to your VCR’s

clock will be made according to the incoming

signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Move the highlight bar (arrow) to your choice by pressing CH5° or SHUTTLE PLUS %Þ, then press MENU and the Semi-Auto Clock Set screen reappears.

IMPORTANT

Turn the VCR off after performing the Semi-Auto Clock Set procedure. "Auto" will appear on the front display panel when the clock is being set. The current time will appear automatically when the clock is set.

EN11

Manual

5		SELECT MODE	Þ
		At the Override Auto Clock Set screen (☞ pg. 10), move
		the highlight bar (arrow) to “MANUAL CLOCK SET” by
		pressing CH▲▼ or SHUTTLE PLUS % , then press OK.
		SET DATE, TIME AND D.S.T.
		The Manual Clock Set		MANUAL CLOCK SET
		screen is displayed and the
6 month digit begins				DATE	1/ 1/97 WED
				TIME	– –:–– AM
		blinking. Press the		D.S.T.	ON
		appropriate NUMBER keys
		to set the date and time (if
			PRESS NUMBER KEY (O–9)
		only 1 digit, press "0" first).
				OR (5,°), THEN (OK)
		Press CH▲▼ or SHUTTLE	PRESS (MENU) TO END
	PLUS %Þ to set AM/PM
		and D.S.T. (Daylight Saving Time). Press OK after AM/
	PM and D.S.T. settings.
	Set D.S.T. to "ON" to set the D.S.T. according to the
	VCR's clock or to "OFF" if D.S.T. doesn't apply to you.
	When you’re finished with this set-up procedure, press
	MENU to start the clock.

NOTES:

●CH▲▼ and SHUTTLE PLUS %Þ can be used to perform all operations. (In this case, press OK after each setting.)

●At the Manual Clock Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item.

MAKE CORRECTIONS

7 To change any of the settings, press OK or SHUTTLE PLUS Þ%until the item you want to change blinks, then set as in step 6.

Auto

SELECT MODE

5 At the Override Auto Clock Set screen, move the highlight bar (arrow) to "AUTO CLOCK SET" by pressing CH▲▼ or SHUTTLE PLUS %Þ, then power off the VCR. Do not power it on again until the clock has been adjusted. The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The clock will be adjusted on the hour based on the time displayed on the VCR, not on the actual real time.)

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.