Manuals / Brands / TV and Video / CRT Television / Toshiba / TV and Video / CRT Television

Toshiba 36HF13 Connecting a DVD player or satellite receiver and a VCR, Using, Index, yourTV, Remote, yourTV, Features, Appendix, Settingup, Connecting, the Control

1 55

Download 55 pages, 2.88 Mb

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, record one TV channel while watching another channel, and record satellite channels.

You will need:

•two (or three, if satellite receiver is used) coaxial cables

•two sets of standard A/V cables

•one pair of standard audio cables

•one S-video cable (between the TV and DVD player/satellite receiver)

From antenna

Stereo VCR

L R

Note:

For the highest possible picture quality from a non-component video DVD player/satellite receiver, use an S-video cable between the TV and DVD player/satellite receiver. (If your DVD player or satellite receiver has component video connections, see page 10).

Do not connect both an S-video cable and a standard video cable between the TV and DVD player/satellite receiver at the same time, or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same set of A/V inputs on the TV. (See the illustration, which

Introduction


Connecting	yourTV

IN from ANT OUT to TV

CH 3

IN

shows the DVD player/satellite receiver connected to VIDEO-1 on the TV and the

the Control

CH 4

OUT

VCR connected to VIDEO-2 on the TV.)

Using

TV

				ANT(75	)
From satellite dish
I N			ANT-1	OUT	ANT-2
I N
	I N			OUT
		COLOR
VIDEO	Y	STREAM	Y	VIDEO
- 1	Y	HD - 2	Y
	PB		PB	L/
	PB	L	PB	MONO	AUDIO CENTER
AUDIO					AUDIO CENTER
AUDIO					CHANNEL IN
	PR	AUDIO	PR	AUDIO	L
VIDEO-1 VIDEO-2 R		R			ON	OFF
VIDEO-1 VIDEO-2 R		R		R	R
				R	R

DVD player/satellite receiver

AUDIO

OUT

L

IN from ANT

R

S-VIDEO VIDEO

OUT OUT

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

	Remote

Settingup	yourTV


UsingtheTV’s	Features


Appendix


Index

9

Contents

Owner's Record Model: 36HF13 Serial No.: Introduction Connecting Dear Customer NOTE TO CATV INSTALLERS IN THE USA Installation Care Service Page Introduction Welcome to Toshiba Exploring your new TV Note regarding Quick Connect Guide Connecting your TV Connecting a VCR Connecting a cable converter box Connecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR Connecting a DVD player with component video and a VCR Connecting a DTV receiver/set-topbox with component video and a VCR Connecting two VCRs Connecting a camcorder Connecting an audio amplifier Connecting an A/V receiver Using the remote control Preparing the remote control for use Installing the remote control batteries Using the remote control with a VCR or a cable TV converter Programming the remote control VCR code table Cable TV converter code table Learning about the remote control Setting up your TV Learning about the menu system Page Page Page Page Using the TV’s features Adjusting the channel settings your Labeling channels To create a channel label: 2.Press y or z to highlight CH LABELING 3.Press x or • to display the CH LABELING menu. CH INPUT will be highlighted 4.Press the Channel Number buttons for the channel you want to label Viewing the wide-screenpicture formats Letterbox and Compression modes Letterbox: •The picture is vertically compressed, with gray bars at top and bottom Compression: •The picture is vertically compressed, with black bars at the top and bottom Watching PIP/double-window Swapping the main and PIP pictures Changing the position of the small PIP window Freezing the PIP picture Using the FAVORITE feature Using the LOCKS menu Using the V-CHIPmenu MPAA RATING (Independent rating system for movies) 1.From the LOCKS menu, select MPAA RATING BLOCKING OPTION 1.From the LOCKS menu, select BLOCKING OPTION MPAA UNRATED: Locking channels Locking video inputs Using the front panel lock feature Changing the PIN code Adjusting the picture Saving your new preferences To save your new preferences: 2.Press y or z to highlight SAVE NEW PREFERENCE 3.Press x or •. When complete, the menu displays “DONE.” The mode automatically changes to PREFERENCE Selecting the color temperature Resetting picture adjustments Selecting the cinema mode Selecting the video input source Labeling the video input sources Using the closed caption feature Setting the sleep timer Setting the clock Adjusting the sound Using the SRS* 3D surround sound feature To turn on the SRS 3D surround: 1.Select STEREO mode (see “Selecting stereo/SAP broadcasts” on page 44) 2.Press MENU, and then press x or • until the THEATER menu appears 3.Press y or z to highlight SRS 3D Using the TV’s Features Resetting your audio adjustments To reset your audio adjustments: Using the SBS (sub-basssystem) feature To turn on the SBS feature and adjust the SBS level: Turning off the built-inspeakers To turn off the built-inspeakers: 1.Press MENU, then press x or • until the AUDIO menu appears 2.Press y or z to highlight SPEAKERS 3.Press x or • to highlight OFF Selecting the background of the menu display Displaying on-screeninformation Viewing the demo mode Understanding the auto power off feature Understanding the last mode memory feature Appendix Specifications Troubleshooting Limited United States Warranty for 27'' FST PURE® and All Larger Television Models Limited Canada Warranty Index