Selecting the character set and viewing mode and general information
20
TELETEXT
Teletext – setting upThis TV has a multi-page teletext memory, which takes a few moments to load and it offers two ways ofviewing text – AUTO and LIST which are explained on the next page.
Teletext continued over the page…
The
6
/
7
button:
Pressing the
6
/
7button once will bring up the teletext
screen. Press again to superimpose the teletext over a
normal broadcast picture. Press again to return to normal
TV mode. You need to return to normal viewing if you
wish to change channels.
When you first press the
6
/

7

button to access the text
service, the first page you see will be the initial page.
In AUTO mode this displays the main subjects available and
their relevant page numbers.
In LIST mode you will see whichever page number is
currently stored on the RED button.
To access any teletext page, enter the 3 digit page number,
using the numbered buttons on the remote control,
e.g. 430, or to advance to the next page, press the
P f(
P)
button, to go back to the previous page press the
P e(
Q)
button.
Sub-pages
Once in this chosen page, if there are sub-pages they will
automatically load into memory without changing the
one you are reading. Arrows will appear alongside the
page number, indicating sub-pageswhich have loaded to
the left or right of the one on the screen. If there are many
sub-pages it will take a long time for them all to load and
this will depend on the speed with which the broadcaster
transmits them.
To access the sub-pagesin
memory press the

XX(BB)

button, then use the
SS
and
RR
buttons to view
them.
Whilst in sub-pages mode an indicator will show in the
bottom left of the screen. After a short time of inactivity the
indicator will disappear. To access the sub-pagesagain press
the

X(B)

button.
These sub-pages will remain available to view until you
choose another page or, in normal TV mode, you change
channel.
About teletextSelecting characters and modes
2
3
4
5
TELETEXT
To select the Mode, with the Qbutton highlight
Mode.
With the Sor Rbutton choose AUTO or LIST.
Press EXIT to finish.
Back
Character
CHARACTER-1
Mode AUTO
From the SET UP menu, use the Por Qbutton
to highlight Teletextand then the Rbutton to
select.
With Character highlighted, use the Rbutton to
select your required character set.
Before using teletext you can choose the correct alphabet
(Character)and whether to view in LIST or AUTO mode,
(explained on the next page).
1
To alter the volume
you will need to cancel
sub-pages mode by
pressing the
X(B)
button first.
CHARACTER-1for Western European countries and Turkey
CHARACTER-2for Eastern European countries