21
Using the TV’s features
Using LIST mode
1PressE to access teletext.
The four choices at the bottom of the screen are now
number – 100,200,300 and 400, which have been
programmed into the TV’s memory.
2To view these pages, use the colored prompt buttons.
e.g. press the Green button to view page 200.
3If you want to change these stored pages, press the
colored button for the color you want to change.
e.g. Press the Green button and enter the 3-digit number.
This number will change in the top left of the screen and
in the colored highlight.
4PressQ to store you r choice. The bars at the bottom of
the screen will flash white.
5You may view other pages by simply entering the 3-digit
page number – but NEVER press Q or you will lose the
favorite already stored.
Teletext buttons on the remote control
Below is an introduction to the teletext buttons on your remote
control and their functions.

E To display a page of teletext:

PressE to display teletext. Press again to superimpose the
teletext over a normal broadcast picture. Press again to return
to normal TV mode.

k To display an index/initial page:

In Auto-mode
Pressk to access the index page. The one displayed is
dependant on the broadcaster.
In LIST-mode
Pressk to return to the 100 page or initial page.

A To reveal concealed text:

Some pages cover topics such as quizzes and jokes. To
discover the solutions, press A.

B To hold a wanted page:

This function is included as it is part of the broadcast teletext
system but you will not need it as this TV allows you to control
the display of sub-pages.

C To enlarge the teletext display size:

PressC once to enlarge the top half of the page, press again
to enlarge the bottom half of the page. Press again to revert to
the normal size.

D To select a page while viewing a normal

picture:

When in teletext mode, if a page selection is made and then
D is pressed, a normal picture will be displayed. The TV
will indicate when the page is present by displaying the title
bar of the text page at the top of the screen. Press E to
view the page.
Note:
It will not be possible to change program position while in
Teletext mode, you will have to cancel the teletext first by
pressing E to return to a normal TV picture.

To select the time display:

If you press D while watching a normal TV broadcast,
you will see a time display from the broadcaster. It will remain
on the screen for about 5 seconds.
Note:
If you press r while this mode is activated, this mode will be
cancelled.
Red Green Yellow Blue
100 TEXT M00 14:58:55
100 200 300 400
100 TEXT M00 14:58:59
100 250 300 400
21:56:25
9:56 and 25 seconds p.m.