106 Picture and Sound Controls

Selecting stereo/SAP broadcasts

The MTS (multi-channel TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1 Press the SETUP button.
2 Select Sound > MTS and press the OK button.
3 Press the p/q (arrow) buttons to select Stereo.
4 Press the EXIT button.
NOTE
❖ You can typically leave the TV in Stereo mode because it outputs the
type of sound being broadcast (stereo or monaural).
❖If the sound is noisy, select Mono.
❖If there is no sound in SAP mode, select Stereo.

Adjusting the audio balance

You can adjust the audio balance.
1 Press the SETUP button.
2 Select Sound > Balance and press the OK button.
3 Press the t/u (arrow) buttons to adjust the balance.
4 Press the EXIT button.

Adjusting the range

You can adjust bass and treble.
1 Press the SETUP button.
2 Select Sound > Bass or Treble.
3 Press the OK button.
4 Press the t/u (arrow) buttons to adjust the range.
5 Press the EXIT button.
Adjusting the audio