Toshiba Easy Setup using PBC (Push button configuration), Easy Setup using PIN (Personal Identification Number)

114 Advanced features
Easy Setup using PBC (Push button configuration)
1 Press the SETUP button.
2 Select Network > Network Setup > Wireless Setup and press the
OK button
3 Press the p/q (arrow) buttons to select Easy Setup and press the
OK button.
4 Press the p/q (arrow) buttons to select PBC.
5 Press the q (arrow) button to select Start Scan, and then press the
OK button.
6 Following the on-screen instructions, push the appropriate button on
your AP.
7 When a screen reporting that “the setup has succeeded” appears,
press the OK button.
To cancel searching for the AP:
❖Press the BACK button while searching for the AP. A message
appears. Press the t/u (arrow) buttons to select Yes, and then press
the OK button.
Easy Setup using PIN (Personal Identification Number)
1 Press the SETUP button.
2 Select Network > Network Setup > Wireless Setup and press the
OK button.
3 Press the p/q (arrow) buttons to select Easy Setup and press the
OK button.
4 Press the p/q (arrow) buttons to select PIN.
5 Press the q (arrow) button to select Start Scan, and then press the
OK button.
The Scan screen appears.
6 Enter the PIN displayed on this screen into your computer or AP.
7 Press the p/q (arrow) buttons to select the desired AP, and then
press the OK button.
NOTE
Check the MAC address on the label or in the manual of the AP and select
an AP.
8 When a screen reporting that “the setup succeeded” appears, press
the OK button.
Setting up the Network