Toshiba 40E200U1 owner manual Signal names for mini D-sub 15-pin connector, Ground Reserved

Chapter 2: Connecting your TV

Note:

•• The PC audio input terminals on the TV are shared with the HDMI-1 analog audio input terminals ( page 44).

•• Some PC models cannot be connected to this TV.

•• An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.

•• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

•Signal names for mini D-sub 15-pin connector

Pin	Signal	Pin	Signal	Pin	Signal
No.	name	No.	name	No.	name
1	R	6	Ground	11	Reserved
2	G	7	Ground	12	SDA
3	B	8	Ground	13	H-sync
4	Reserved	9	5V	14	V-sync
5	Reserved	10	Ground	15	SCL

To connect a PC to the HDMI terminal on the TV:

When connecting a PC to the HDMI terminal on the TV, use an HDMI-to DVI adapter cable and analog audio cables.

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog cables are not necessary ( page 16).

TV back panel

PC audio

cable

Computer

PC audio

output

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 57.

Note:

•• The edges of the images may be hidden.

•• If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

19

40E200U1_EN-2nd.indb 19

2010/3/9 下午 01:59:21