48
LX177 (E/F) Web 213:276
Chapter 5: Setting up your TV

To delete the custom label:

1Open the Channel Labeling window.
2Highlight the label to be deleted and press =.
3Highlight Yes from the deletion confirmation window
and press T.
4Highlight Done and press T to save changes, and go
back to the Channel Labeling window.
Setting the HDMI audio mode

To set the HDMI audio mode:

1Press Y and open the Audio menu.
2Highlight Audio Setup and press T.
3Press B or b to select HDMI 1 Audio and then press
C or c to select the HDMI 1 audio mode (Auto, Digital,
or Analog). (Auto is the recommended mode.) See
“Connecting an HDMI or DVI device to the HDMI input”
(-page 20).
Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the
HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to
Yes,” the HDMI 1 Audio setting is set to “Digital” and is
grayed out in the menu. (Also see item 5 on page 12 and
“Setting the PC Audio” on page 72.)
Custom
Clear All
Done
24
Press CH UP/DOWN to
change channels.
Channel Labeling
A&E
ANT
TNT
TNTHD
TOCDEFG
TMCw
TMCXw
TMCX
TMC
TIMES
TLC
Delete the selected custom label?
YesNo
Done
Audio Setup
Language
Reset
MTS Stereo
English
Speakers On
Dolby Digital
Optical Output Format
HDMI 1 Audio
PC Audio No
Auto
Dynamic Range Control Compressed
Dolby Digital
42LX177_EN.book Page 48 Tuesday, May 15, 2007 1:58 PM