Chapter 6: Using the TV’s features

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 on the previous page.

Note:

A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.

If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1 Press Yand open the Audio menu.

2 Highlight Audio Settings and press T.

3 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance).

Audio Settings

Bass100

Treble100

Balance0

StableSoundOff

ResetDone

4 Press C or c to adjust the level.

C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

5 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

1 Press Yand open the Audio menu.

2 Highlight Audio Settings and press T.

3 In the StableSound field, select On.

Audio Settings

Bass100

Treble100

Balance0

StableSoundOn

ResetDone

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: The RESET function returns your audio adjustments to the following factory settings:

Bass . . . . . . . . center (50)

Treble . . . . . . center (50)

Balance . . . . . center (0)

StableSound . . Off

To turn off the StableSound feature:

Select Off in step 3 above.

65

Page 65
Image 65
Toshiba 42LX177 manual Adjusting the audio quality, Using the StableSound feature, To adjust the audio quality