Toshiba 42XV550A_560A, 46XV550A_560A Sound adjustment, Stereo and Bilingual transmissions

Using the TV’s features (General)

Sound adjustment

Setting the MTS (Multi-channel TV Sound)

- analogue only -

Auto mode

The MTS Auto mode automatically recognizes stereo/ bilingual programmes depending on the broadcast signal.

1 Press M, and then press Y or Z to display the SOUND menu.

SOUND

MTS		Auto
Dual		Dual 1
Bass	0
Treble	0
Balance	0
WOW
Stable Sound		Off
Dynamic Range Control

2 Press V or U to select MTS, and then press Y or Z to select Auto or Mono.

Mono mode

If you experience noise or poor reception of any stereo/ bilingual programme, set the MTS mode to Mono. Noise will be reduced and reception may improve.

Note:

If you experience noise with a particular programme whose channel reception is usually good, try setting MTS mode to Auto, then switch S to e Mono (monaural) (- page 21).

Selecting Dual 1 or Dual 2 mode - analogue only -

You can hear only Dual 1 or Dual 2 sound, when bilingual programmes are received.

1 Press M, and then press Y or Z to display the SOUND menu.

SOUND

MTS		Auto
Dual		Dual 1
Bass	0
Treble	0
Balance	0
WOW
Stable Sound		Off
Dynamic Range Control

2 Press V or U to select Dual, and then press Y or Z to select Dual 1 or Dual 2.

Notes:

•When the MTS setting is in Mono mode, the Dual menu is not selectable.

•The Dual menu setting status remains even if the TV is turned off.

Stereo and Bilingual transmissions

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press Sto select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will display. Choose the desired channel number, and if the word Dual appears, press Sto select Dual 1, Dual 2, Mono (NICAM) or Dual 1 or Dual 2 (German stereo/bilingual broadcast).

For DTV programmes

For stereo or dual mono broadcasts, press Sand use Y or Z to select settings.

Mode Display	Pressing Z
d Stereo	Stereo S Left S Right
j Dual mono	Dual 1 S Dual 2 S Dual
e Mono	—
Surround	—

Adjusting the sound quality

1 From the SOUND menu, press V or U to select the item you want to adjust.

2 Press Y or Z to adjust the settings as desired.

Selection	Y	Pressing	Z
Bass	weaker		stronger
Treble	weaker		stronger
Balance	decreases the right		decreases the left
	channel		channel

Using SRS WOW® surround sound

SRS WOW® is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer and wider.

WOW® consists of three features; SRS® 3D, SRS FOCUS™, and SRS TruBass®.

1 From the SOUND menu, press V or U to select WOW, and then press Q.

2 Press V or U to select an item you want to adjust, and then press Y or Z to adjust the settings as required.

WOW

SRS 3D	Off
FOCUS	On
TruBass	High

SRS 3D: To turn the surround effect On or Off.

FOCUS: To turn the vocal emphasis effect On or Off.

TruBass: To select the desired bass expansion level (Off, Low or High).

21