Toshiba 61A60R, 50A60A Adjusting the sound, Muting the sound, Selecting stereo/SAP broadcasts

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right corner. To restore the sound, press MUTE again.

When you press the MUTE button, you automatically activate the closed caption feature. To deactivate this feature, press the MUTE button again. This feature only works when the closed caption mode is set to OFF. See “Using the closed caption feature” on page 35 for more information.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while you watch TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time you turn the TV on, change the channel, or press RECALL.

The MTS feature is not available when the TV is in VIDEO mode.

To listen to stereo sound:

1.Press MENU, and then press x or • until the AUDIO menu appears.

AUD I O

MTSMONO

BASS5 0

TREBLE5 0

BALANCE0

RESET

2.Press y or z to highlight MTS.

3.Press x or • to highlight STEREO.

AUD I O
MTS	STEREO / SAP / MONO
BASS	5 0
TREBLE	5 0
BALANCE	0
RESET

You can leave your TV in STEREO mode because it automatically outputs the type of sound being broadcast (stereo or monaural). If the stereo sound is noisy, select MONO to reduce the noise. The word STEREO or SAP displays in yellow in the menu when the TV receives the signal.

To listen to SAP (if available):

1.Press MENU, and then press x or • until the AUDIO menu appears.

2.Press y or z to highlight MTS.

3.Press x or • to highlight SAP. You will hear the station’s second audio program (if available) from the speakers while viewing the original program’s picture (see note at right).

RECALL

LIGHT RECALL POWER

TV

CABLE MUTE TV/VIDEO TIMER

VCR

MUTE

1 2 3

CH

4 5 6

7 8 9

CH RTN VOL

100 0 ENT

CH

MENU
VOL	VOL	TV/	DEMO
	EXIT	VIDEO
	CH

MENU yzx •

	LIGHT	RECALL POWER
TV
CABLE	MUTE	TV/VIDEO TIMER
VCR

1	2	3
			CH
4	5	6
7	8	9
		CH RTN	VOL
100	0	ENT
		ADV/		MENU
.CAPT	PIP CH		MENU
C
FAV	ENTER		FAV
				yzx •
RESET		ADV/	EXIT

PIP CH

Note :

A second audio program (SAP) can be heard only on those TV stations that offer it. For example, some TV stations broadcast music as a second audio program. If you have SAP on, you will see the current program on the screen but hear music instead of the program’s normal audio.

If you have SAP on, and the station you are watching is not currently broadcasting a second audio program, you will see the picture but not hear any sound. If this happens, but the TV in STEREO mode so you can hear the station’s normal audio.

Introduction
Connecting	yourTV
Usingthe	RemoteControl
Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

37