Toshiba 50HMX96 Setting the On/Off Timer, Using the PC setting feature, To set the On/Off Timer

Highlight Done and press T.

HMX96_EN.book Page 52 Friday, April 28, 2006 12:03 PM

Chapter 5: Using the TV’s features

Setting the On/Off Timer

You can use the On/Off Timer to turn the TV on and off at a preset time on a recurring basis.

Note: You must first set the time (- page 28).

To set the On/Off Timer:

1 Press Yand open the Setup menu.

2 Highlight On/Off Timer and press T.

3 In the DAY field, press C or c to select the recurrence (weekends, weekdays, every day, etc).

On/Off Timer

Turn TV ON:
Day				Weekends
Time (HH:MM)			0	9	:	0	0	AM
TV ON Duration:
				30 Minutes
	Reset	Cancel						Done

4 Press b to highlight the Time field, and then use the Number buttons to enter the time you want the TV to turn on.

5 When the AM/PM field is highlighted, press c to select AM or PM.

6 Press b to highlight the TV ON Duration field, and then press C or c to select the length of time until the TV turns off (30 Minutes, 1 Hour, 2 Hours, 4 Hours,

8 Hours, 12 Hours).

7

8 Turn off the TV. The TV will turn on automatically on the day(s) and at the time you set. The TV will then turn off automatically after the length of time you set in the TV ON Duration field.

Note:

•When a power failure occurs, the On/Off Timer settings may be cleared.

•To display the On/Off Timer setting, press E.

To turn off the On/Off Timer:

Select Not Set in step 3 above.

On/Off Timer

Turn TV ON:
	Day		Not Set
	Reset	Cancel		Done

Using the PC setting feature

You can view the image from a PC on the TV screen. The PC must be connected to the TV’s PC IN terminals

(- Installation Guide).

You can use the PC Settings feature to adjust the picture’s horizontal position/width, vertical position/height, clock phase, and sampling clock.

If the edges of the picture are cut off, readjust the Horizontal Position/Width and Vertical Position/Height. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press +to select PC input mode

(- “Selecting the video input source to view” page 32).

2 Press Yand open the Setup menu.

3 Highlight PC Settings and press T.

Note: If a PC is not connected, this feature will be grayed out in the Setup menu.

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
ColorStream HD1 Audio	No
HDMI 1 Audio	Auto
ColorStream HD2 Audio	No
Navigate ENTER Select	CH RTN Back EXIT Exit

4 Press B or b to highlight the item you want to adjust. 5 Press C or c to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Horizontal Width		0
Vertical Position		0
Vertical Height		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

•Horizontal Position:

Moves the picture left/right.

The adjustment range is within ±5 from center.*

•Vertical Position:

Moves the picture up/down.

The adjustment range is within ±5 from center.*

•Horizontal Width:

Adjusts the width of the picture.

The adjustment range is within ±5 from center.*

•Vertical Height:

Adjusts the height of the picture.

The adjustment range is within ±5 from center.*

52

HMX96 (E/F) Web 213:276