71
Using the TV’s features

Using the Auto Aspect feature

Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
❖A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
❖A 480i signal from the ColorStream® HD or Video input
❖480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI 1 or HDMI 2 input.
The auto aspect ratio feature is not applicable to the PC input.
To turn on the auto aspect ratio feature:
1Press the MENU button and open the Picture menu.
2Highlight Theater Settings, and then press the ENTER
button.
3In the Auto Aspect Ratio field, select On.
4To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
To turn off the Auto Aspect ratio feature, Select Off in step3 above.
Aspect Ratio of
Signal Source
Automatic Aspect Size (automatically selected when Auto
Aspect is On)
4:3 Normal 4:3
4:3 Letter Box TheaterWide 2
16:9 Full Full
Not defined (no ID-1
data or HDMI® aspect
data)
The current picture size you selected. For more information,
see “Selecting the picture size” on page 65.
NOTE