Troubleshooting (Continued)
Recording
Playback
Other problems
| Trouble | Action | |
| Recording cannot be | • Slide the mode switch to select the desired mode (! or #). | |
| |||
| performed. |
| |
|
|
|
|
|
|
| • If the camcorder temperature increases, REC fl ashes in the LCD |
|
|
| monitor and recording stops automatically to protect the HDD. |
|
|
| Turn off the camcorder, wait for a while, and start recording again. |
|
|
| • Move away from a place where the camcorder is affected by |
| Recording stops by | excessive sound or vibration (such as a concert hall). | |
| • A malfunction may occur in the HDD of the camcorder. In this | ||
| itself. | ||
| case, record to a microSD card. | ||
|
|
| |
|
|
| • Insert a commercially available microSD card, and set each of the |
|
|
| [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD]. |
|
|
| • Recording stops automatically after 12 hours of continuous |
|
|
| recording. |
| Sound or video are | • Sometimes playback is interrupted at the connecting section | |
| interrupted. | between two scenes. This is not a malfunction. | |
|
|
| • Select [PLAYBACK MPG FILE] then search the video on the index |
|
|
| screen. |
| Cannot find a recorded | (Video fi les that have damaged management information can be | |
| played back.) | ||
| video. | ||
| • Cancel group display and date search functions. | ||
|
|
| |
|
|
| • Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA |
|
|
| FOR IMAGE]. (Files on other media are not displayed.) |
|
|
| • Check the remaining battery pack charge. |
| The lamp does not flash | (When the battery pack is fully charged, the lamp does not fl ash.) | |
| • When recharging in either a hot or cold environment, ensure that | ||
| during battery pack | battery is being charged within the permitted temperature range. | |
| charging. | ||
| (If the battery pack is being recharged outside the permitted | ||
|
|
| |
|
|
| temperature range, recharging may stop to protect the battery pack.) |
|
|
|
|
|
|
| • When connecting to the HDMI cable, the image or sound |
|
| ||
| When connecting to | may not appear on the TV properly depending on the TV | |
| the HDMI cable, the | connected. In such cases, perform the following operations. | |
| image or sound does | 1) Disconnect the HDMI cable and connect it again. | |
| not appear on the TV | 2) Turn off and on the camcorder again. | |
| properly. |
| |
|
|
| • TVs may operate differently depending on the specifi cations, |
|
| ||
|
| even if they are | |
| not work properly, and | functions of the camcorder cannot be guaranteed to operate in | |
| the TV does not work | combination with all the TVs. In such cases, set [HDMI CONTROL] | |
| to [OFF]. | ||
| in conjunction with the | ||
|
| ||
| camcorder. |
| |
|
|
|
|
⬛If a malfunction occurs in the HDD
! Perform [FORMAT HDD]. (All data is deleted.)
#If this does not solve the problem, perform the disc check function from a PC after formatting. $ If this does not solve the problem, contact the JVC customer service for repairs.
⬛To reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.
#Execute [FACTORY PRESET].
38EN
