Toshiba 51HX93 Viewing the digital signal meter, Checking system status, Restore Factory Defaults

Chapter 6: Setting up your TV

Viewing the digital signal meter

You can view the digital signal meter for ANT 1 and ANT 2 digital TV input sources only.

To view the digital signal meter:

1.Press MENU and open the SETUP menu.

2.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below.)

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off

Slide Show Interval • • • 2 Sec

Convergence

3.Open the TERRESTRIAL menu, highlight SIGNAL METER, and press ENTER.

Terrestrial

Input Configuration

Channel Program

Channel Add/Delete

Signal Meter

4.Use the yzx • buttons to select the antenna input and digital channel whose signal you want to check.

Note: The digital channel number listed in the Signal Meter screen does not correspond to an actual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations.

Signal Meter					Signal Meter
	Signal Unlocked					Signal Unlocked
			0	Peak 0				0	Peak 0
	Antenna			1		Antenna			1
	Channel (Digital)			1		Channel (Digital)			134
		OK					OK

To close the screen and return to the TERRESTRIAL menu:

Highlight OK and press ENTER.

To return to normal viewing:

Press EXIT.

Checking system status

To check the system status:

1.Press MENU and open the SETUP menu.

2.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3).

3.Open the SYSTEM STATUS menu, highlight SYSTEM INFORMATION, and then press ENTER.

Setup	System Status
Installation
	System Information
Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off

Slide Show Interval • • • 2 Sec

Convergence

4.Use the x • buttons to scroll through the menu bar to check the Product Information and Software Version.

System Information		System Information
Product Information		Software Version
Brand:	Toshiba	1.0.7
Model:	57H93	Jul 21 2003 - 16:31:05
IEEE-1394 GUID:	0000391428343803	FW 2.1
	OK	OK

To close the screen and return to the TERRESTRIAL menu:

Highlight OK and press ENTER.

To return to normal viewing: Press EXIT.

Restore Factory Defaults

To restore all settings and channels to their factory default values:

1.Follow steps 1–3 above.

2.Use the x • buttons to scroll through the menu bar to select FACTORY DEFAULTS.

3.The screen below left appears. Enter your PIN code (or 0000 if no PIN code has been set). The screen below right appears.

To cancel the reset: Highlight NO and press ENTER.

To continue the reset process: Highlight YES and press ENTER. The TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the restore.

System Information

Factory Defaults

This window provides the ability to reset the TV settings.

Type in your PIN now (or “0000” if no PIN has been set) to restore settings to their factory default values.

OK

System Information

Factory Defaults

This window provides the ability to reset Press YES to confirm. After the TV

the TV settings.

!

turns off, unplug it and plug it Type in your PIN now (or “0000” if no PIN

back in to complete the reset. has been set) to restore settings to their

Yes No

factory default values

OK

52 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.