Toshiba 51HX93 owner manual Setting the time and date, Adjusting the color convergence, continued

Chapter 6: Setting up your TV

Adjusting the color convergence					Setting the time and date
(continued)					Note: If you already set up the TV Guide On Screen system, the
6. Press ENTER to change the color (to blue, in this					time and date were set automatically and you can skip this step.
					To set the time and date:
		example).
7.	Press y z x • to align the blue and white lines.				1. Press MENU and open the SETUP menu.
					2. Highlight INSTALLATION and press ENTER. (A new set
8. Press EXIT to display the 56-point convergence screen
					of INSTALLATION menu icons will appear on-screen, as
		(below).
					shown in step 3 below.)
9.	Press y z x • to select the area to adjust.				3. Open the TIME AND DATE menu, highlight
10. Press ENTER to adjust the selected area.					START SETUP, and press ENTER.
							Setup			Time and Date
							Installation
										Start Setup
			: TO	SELECT POSITION			Sleep Timer
			ENTER: TO ADJUST CONVERGENCE				On/Off Timer
			EXIT : TO	FINISH ADJUSTMENT			Digital Tuner Hold • • • • • • • Off
							Slide Show Interval • • • 2 Sec
11.		Press y z x • to align the red (in this example) and white					Convergence
		lines in the selected cross.			If you have not set up the TV Guide On Screen system, the
12. Press ENTER to change the color (to blue, in this					following screen will appear. To set the time, highlight TV
					GUIDE and press ENTER. The TV Guide On Screen
		example).
					setup sequence will start, and the time and date will be set
					automatically.
						Time and Date
							Your TV Guide On Screen system can provide
			: TO	ADJUST RED			accurate time and date information.
			ENTER: TO CHANGE COLOR			It is recommended you set up TV Guide On Screen
			EXIT : TO FINISH ADJUSTMENT
							first, and use it to obtain the time and date.
							Manual	TV Guide	Cancel

13. Press y z x • to align the blue and white lines.

	Note: If you do not set up the TV Guide On Screen system and you
	manually set the time and date (by highlighting MANUAL instead of
	TV GUIDE, above), you will lose the time and date information if a
	power outage occurs. If you set the time and date through the TV
	Guide On Screen system and a power outage occurs, the time and
: TO ADJUST BLUE
	date will be updated automatically when the power is restored.
ENTER: TO SELECT POSITION
EXIT : TO FINISH ADJUSTMENT

14. Press ENTER to select another area to adjust.

: TO SELECT POSITION

ENTER: TO ADJUST CONVERGENCE

EXIT : TO FINISH ADJUSTMENT

15.Repeat steps 10–14 until you are done adjusting the convergence.

16.When done adjusting the convergence, press EXIT to close the screen and return to normal TV viewing.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 51

(E) 51/57/65HX93