Connecting a VCR, Using | Toshiba 62HMX84, 52HMX84 guide

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

•two coaxial cables

•one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

Introduction


Connecting	yourTV


Usingthe	RemoteControl


Settingup	yourTV

theTV’s	Features

You will need:

• three coaxial cables

TV

From Cable

OUT IN

Using

Appendix

Cable converter box

Index

9

Image 9

Toshiba 62HMX84, 52HMX84 Connecting a VCR, Connecting a cable converter box, Using, You will need Three coaxial cables

Contents

Index Dlptm Projection Television Dear Customer Lamp Unit Replacement Installation Important Safety Instructions Care Service Important notes about your DLP projection TV Important Safety Information Introduction Introduction Introduction Connecting YourTV ControlWelcome to Toshiba Exploring your new TV Connecting your TV Connecting an antenna or cable TVConnecting your TV Connecting a cable converter box Connecting a VCRUsing You will need Three coaxial cables Connecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting a camcorder Connecting two VCRs Connecting an Hdmi or a DVI device to the Hdmi inputs One Hdmi cable type a connectorOne pair of standard analog audio cables Connecting an audio system Using the remote control Preparing the remote control for useInstalling the remote control batteries Remote Control functional key chart Using the Remote Control CBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setup Usingthe RemoteControl Setting up your TV Features Connecting YourTVIntroduction Appendix Index Device code table VCR setup codes CD Player setup codes Learning about the remote control Introduction Connecting YourTV Usingthe RemoteControl Setting up your TVSettingup yourTV UsingtheTV’s Features Selecting the antenna input Changing the on-screen display language Adding channels to the TV’s memory Introduction Connecting YourTVProgramming channels automatically To program channels automatically Selecting the Quick Restart Changing channelsAdding and erasing channels manually Enter Using the TV’s features Adjusting the channel settingsIntroduction Connecting YourTV Usingthe Control Press y or z to highlight Using the TV’s FeaturesFavorite CH Press Enter to display the Favorite CH menu Labeling channels UsingtheTV’s Features AppendixPress z or y to highlight Clear Natural picture size Selecting the picture size Setting your Usingthe RemoteControl Scrolling the TheaterWide picture TheaterWide 2 and 3 only Press Enter to display the Scroll Adjustment modeTo raise the picture, press y To lower the picture, press z Usingthe RemoteControl Settingup YourTV Using the Auto Aspect featurePress y or z to highlight Auto ASPECT, and then press Press y or z to select ON, and then press Enter To close the POP window Press Split again or Exit Using the POP double-window feature Switching the main and POP pictures Switching the speaker audio main or POPUp TV Double-Window aspect ratio Using the programmed channel search function About the auto favorite feature Using the favorite channel search function Using the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN code OFF To release your setting Unlock Enable BlockingTV Rating Independent rating system for broadcasters Press z or y to select an item Mpaa Rating Mpaa Rating Independent rating system for movies Locking channels Unlocking programs temporarilyRepeat steps 2 and 3 for other channels Press y or z to highlight Clear ALL, and then press Enter Changing the PIN code Locking the video inputsOFF From the Locks menu, press y or z to highlight NEW PIN Code Adjusting the picture Selecting the picture modeAdjusting the picture quality Selecting the color temperature Press x or to select the mode you preferSaving your new preferences Resetting picture adjustments Using the CableClear DNR featureReset Done Connecting YourTV Control Selecting the Lamp modeSelecting the cinema mode Cinema Mode Selecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timer To display the time on-screen Press Recall Adjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using Remote Using the WOW surround sound featureAdjusting the sound quality Settingup YourTV UsingtheTV’s Features Appendix Index Enjoying the Dolby Virtual sound feature Resetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Select on in above Understanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen information Appendix Lamp unit replacement User-replaceable component When to replace the lamp unitU.S Temperature of the lamp immediately How to replace the lamp unit Cleaning the lamp unit glass Replace the thumb screw and hand-tighten Lamp unit disposal LED indications VIDEO/AUDIO Input Specifications Troubleshooting Limited United States Warranty Limited Canada Warranty Audio OUT sound, selecting IndexPage Page Manufactured by