Toshiba 62HM116 manual LED indications, LED Indication Condition Solution Voice Announce

HM116_EN.book Page 80 Monday, June 19, 2006 7:30 PM

Chapter 8: Troubleshooting

LED indications

The yellow, blue, and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV’s status, as described below.

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

TV Front

LAMP

POWER

TIMER

REC

Yellow LED

Blue LED

Red/Green LED

“Voice announce” feature

When certain non-standard conditions occur, the LEDs

on the TV will blink and the TV will play a recorded “voice announcement” describing the condition (see the table below for the specific conditions that include a voice announcement).

To repeat the voice announcement and hear additional information, press the MENU button on the TV while the LEDs are blinking.

	LED Indication	Condition	Solution	Voice
				Announce
1)	Blue is ON (solid).	The TV is operating	–	–
		properly.
2)	Yellow blinks.	In LPS mode (standby	See “Setting the Quick Restart™ feature” (- page 30).	–
		with Quick Restart ON).
3)	Blue is ON (solid).	The lamp is not working	The TV will automatically try to restart itself eight times
	Yellow blinks.	properly.	(see item #4).
			Note: If the TV is powered off and then quickly on again
			when the lamp unit is hot, it may take several minutes	–
			for the picture to appear on-screen. This is a property of
			DLP TV lamp technology and is NOT a sign of
			malfunction. For details, see “Setting the Quick
			Restart™ feature” and “IMPORTANT NOTICE ABOUT
			HOT LAMP RESTART” (- page 30).
4)	Yellow is ON	The lamp is not working	Turn the TV OFF and then ON again. If the problem	“Lamp not
	(solid). Red blinks.	properly after the eighth	persists, contact Consumer Solutions at	working”
		automatic restart (see	1-800-631-3811.
		item #3).
5)	Yellow is ON	The lamp unit door is not	Turn OFF the TV and unplug the power cord. Review	“Lamp door is
	(solid).	seated properly.	“Lamp unit replacement and care” in Chapter 9 to	open.”
			ensure that the lamp door is installed securely.
6)	Red blinks.	Fan stopped		“Fan
		(light engine).		stopped.”
7)	Blue is ON (solid).	Fan stopped		–
	Green blinks.	(CableCard).
8)	Blue blinks slowly.	Abnormal operation of	Turn OFF the TV and unplug the power cord. Plug the	–
		BUS line.	power cord in again and turn ON the TV.
9)	Blue blinks quickly.	Power Protect		–
		Detection.
10)Blue blinks quickly.		The color wheel has		“Color wheel
	Red blinks.	stopped.		stopped.”
11)Blue blinks quickly.		An abnormal	Turn OFF the TV. Check to make sure none of the slots	“Temperature
	Yellow blinks.	temperature increase	or openings in the TV cabinet are covered, blocked, or	warning.”
	Red blinks.	has occurred.	dusty. Turn ON the TV again.
12)Red is ON (solid).		Recording in progress.	–	–

If, after trying the solution, the problem still exists:

In the U.S., call TACP Consumer Solutions at 1-800-631-3811.

80

HM116 (E/F) Web 213:276