Toshiba 46HM15, 62HM15A Using the TV’s features, Selecting the video input source to view

8 Using the TV’s features

Selecting the video input source to view

To select the video input source to view:

1.Press INPUT on the remote control or TV/VIDEO on the TV front panel.

2.Press 0–8 to select the input source you want to view, which will depend on the input terminals you used to connect your devices (see Chapter 2).

The current signal source displays in the top right corner of the Input Selection screen.

Input Selection ANT 1

0 ANT 1

1Video 1

2Video 2

3Video 3

4ColorStream HD1

5ColorStream HD2

6HDMI 1

7HDMI 2

8ANT 2

0 - 8 / INPUT to Select

Note:

•When the Input Selection screen is open, you also can use the yz buttons on the remote control (or the Channel yz buttons on the front panel) to change the input, or you can repeatedly press INPUT on the remote control or TV/VIDEO on the TV front panel to change the input.

•To select an IEEE1394 input source, press the TheaterNet DEVICE button on the remote control (see page 26 and 45).

•If an IEEE1394 device is the current input, it will appear at the bottom of the Input Selection list; however, it will not display in the list if you change the input source.

•You can label the video input sources according to the specific devices you have connected to the TV (see “Labeling the video input sources” on the next page).

•The source can be “hidden.” See page 68 for details.

Numbers

INPUT

y

z

Remote control

TV/VIDEO

CHANNEL zy

TV front touchpad	{
*The MENU
button
functions as
the ENTER	(ENTER)*
button when
a menu is
on-screen.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 67