Changing channels

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100).

For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5.

To change to the next programmed channel:

Press Channel y or z on the TV or remote control.

Changing channels using SpeedSurf

To use SpeedSurf to change to a specific programmed channel:

1.Press and hold Channel y or z for about one second. The TV will enter the SpeedSurf mode.

1 6 T B S

1 3 E S P N

1 1 F O X

7C B S

4C N N

2.Repeatedly press or hold Channel y or z while the SpeedSurf mode is on-screen to scroll the channel list. Release the button to display the highlighted channel.

Adjusting the color convergence

This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. Convergence may drift over time or if you move the TV. If you can see clear images on your TV screen, skip this procedure.

It is recommended that the adjustment is made only after the TV has been on for at least 30 minutes.

Automatically adjusting the color convergence using

TouchFocus™

Press TOUCHFOCUS on the TV once. The TV will enter auto- convergence mode, and adjust convergence automatically.

MENU

VOLUME

CHANNEL

EXIT TV/VIDEO Touch Focus

TOUCH FOCUS

TOUCH FOCUS F I N I SHED

When the adjustment is complete, the normal picture appears.

If the error message “Touch Focus Error” appears, retry the

TouchFocus adjustment.

Introduction

 

Connecting

yourTV

Usingthe

RemoteControl

Settingup

yourTV

UsingtheTV’s

Features

Appendix

 

Index

 

25