Toshiba 65H93, 57H93 owner manual Selecting the picture mode, Adjusting the picture quality

Chapter 8: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four picture modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory setting)
Standard	Standard picture settings (factory setting)
Movie	Lower contrast for darkened room (factory setting)
Preference	Your personal preferences

To select the picture mode:

1.Press MENU and open the VIDEO menu.

2.Highlight PICTURE SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3.Press z to highlight the MODE field, and then x • to select the mode you prefer.

Picture Settings		ANT 1
Mode	Preference
Contrast	50
Brightness	50
Color	50
Tint	0
Sharpness	50
Save	Done	Reset

4.To temporarily save the mode you selected, highlight DONE and press ENTER.

To permanently save the mode you selected, highlight SAVE and press ENTER.

Note:

•The picture mode you selected is for the current input selection only (ANT 1 in the example above). You can select a different picture mode for each input selection.

•If you select one of the factory-set picture modes (SPORTS, STANDARD, or MOVIE) and then change a picture quality setting (for example, increase the contrast), the picture mode automatically changes to PREFERENCE in the Picture Settings menu.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences.

To adjust the picture quality:

1.Press MENU and open the VIDEO menu.

2.Highlight PICTURE SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3.Press z or y to select the picture quality you want to adjust (CONTRAST, BRIGHTNESS, COLOR, TINT, or SHARPNESS), and then x and • to adjust the setting, as described in the table below.

Picture Settings		ANT 1
Mode		Sports
Contrast	100
Brightness	50
Color	50
Tint	0
Sharpness	50
Save	Done	Reset

Selection	x Pressing •
contrast	lower	higher
brightness	darker	lighter
color	paler	deeper
tint	reddish	greenish
sharpness	softer	sharper

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

Note: The settings you selected are for the current input selection only (ANT 1 in the example above). You can select different settings for each input selection.

The picture qualities you adjusted are automatically saved in the PREFERENCE mode (see “Selecting the picture mode” above).

Resetting the picture settings

To reset the picture settings to their factory values:

Highlight RESET in the Picture Settings menu and press

ENTER.

Note: This resets the pictures settings for the current input source only (ANT 1 in this example).

Picture Settings		ANT 1
Mode		Sports
Contrast	100
Brightness	50
Color	50
Tint	0
Sharpness	50
Save	Done	Reset

72 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.