Toshiba 65H93, 57H93 Connecting a DVD player with component video and a VCR, Source on the TV

Chapter 2: Connecting your TV

Connecting a DVD player with component video and a VCR

Your TV has ColorStream® (component video) inputs. Connecting a DVD player with component video output (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality.

You will need:

￿ five coaxial cables

￿ two sets of standard A/V cables

• For better picture performance, if your VCR has S-video, use an

S-video cable (plus the audio cables) instead of the standard video

cable. However, do not connect both types of video cable to

VIDEO 1 at the same time or the picture performance will be

unacceptable.

From antenna or Cable

Stereo VCR

VIDEO	AUDIO
IN from ANT	L	R

CH 3	IN
CH 4
OUT to TV	OUT

TV

• If you have a mono VCR, connect L/MONO on the TV (VIDEO 1)

to your VCR’s audio out jack using the white audio cable only.

￿ one pair of standard audio cables

￿ one set of component video cables

Connect the IR blaster cable to the G-LINK jack

ANT( 75	)
		G-LINK	DVI/HDCP IN	TheaterNet
				IEEE1394
				1
ANT-1	ANT-2
				IEEE1394
	REC OUT			2
VIDEO	L	R		DIGITAL
	AUDIO			AUDIO OUT
		IN

• You can connect the component video cables (plus audio

cables) from the DVD player to either set of ColorStream jacks

on the TV (HD-1 or HD-2). The ColorStream HD-1 and HD-2

jacks can be used with Progressive (480p, 720p) and

Interlaced (480i, 1080i) scan systems. A 1080i signal will

provide the best picture performance.

• If your DVD player does not have component video, see

page 15. If your DVD player has DVI/HDCP video, see

page 18.

• Do not connect an S-Video cable and a standard video cable

to VIDEO 1 (or VIDEO 2) at the same time or the picture

performance will be unacceptable.

(see page 25)

VIDEO 1 VIDEO 2	COLOR	COLOR
	STREAM	STREAM
	HD-1	HD-2

S-VIDEO	Y	Y
		PB
		PR
L/
AUDIO	AUDIO	AUDIO
R	R

Y PB PR

AUDIO

R L

OUT	AUDIO CENTER
VIDEO	CHANNEL IN
L/
MONO	L
AUDIO	VAR
	AUDIO ON OFF
	R

TheaterNet

IR OUT

AUDIO

OUT

L

￿ To view antenna or Cable channels:

S-VIDEO COMPONENT VIDEO	VIDEO
OUT	OUT

R

Turn OFF the VCR. Select the ANT 1 video input

source on the TV.*

￿ To view the DVD player:

Select the ColorStream HD-1 video input source on

the TV.*

￿ To view the VCR:

Select the VIDEO 1 video input source on the TV.*

or... Tune the TV to channel 3 or 4 (whichever channel is vacant in your area) and select the ANT 1 video input source on the TV.*

￿To record a TV program while watching a DVD:

Tune the VCR to the channel to record. Select the ColorStream HD-1 video input source on the TV* to view the DVD.

_____________

*To select the video input source, press INPUT on the remote control (see page 61). To program the TV remote control to operate other devices, see pages 30 to 33.

DVD player with component video

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

16 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.