![Notes for Users in Australia and New Zealand](/images/new-backgrounds/142121/14212125x1.webp)
Notes for Users in Australia and New Zealand
Modem warning notice for Australia
Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been specifically configured to ensure compliance with Austel standards when the country/region selection is set to Australia.
The use of other country/region setting while the modem is attached to the Australian PSTN would result in your modem being operated in a non- compliant manner. To verify that the country/region is correctly set, enter the command ATI which displays the currently active setting.
To set the country/region permanently to Australia, enter the following command sequence:
■AT%TE=1
■ATS133=1
■AT&F
■AT&W
■AT%TE=0
■ATZ
Failure to set the modem to the Australia country/region setting as shown above will result in the modem being operated in a
Satellite A110/Satellite Pro A110 | 9 |