User’s Manual 7-1
TOSHIBA A50 Series
Chapter 7
HW Setup and Passwords
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
The TOSHIBA HW Setup program allows you to configure settings for
various system and hardware functions including those for the parallel
printer, display, keyboard and processor.
Accessing HW Setup
To run HW Setup, click start, click Control Panel and select TOSHIBA HW
Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Password,
Device Config, Display, CPU, Boot Priority, Keyboard, LAN and USB.
There are also three buttons: OK, Cancel and Apply.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to the
computer. Please note that some models do not provide a Parallel/Printer
tab or a CPU tab for configuration of these respective functions.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.