- 181 -
10. LED INDICATIONS No. LED Indication
Printer Status
Restoration
by
[FEED] key
Acceptance
of Status
Request
Reset
Green Red Orange Yes/No Command
Yes/No
1 U In the online mode - Yes
O U In the online mode
(Communicating)
- Yes
2
U U The head was opened in the
online mode.
- Yes
3
U U O In a pause state Yes Yes
4 U A parity error, overrun error
or framing error has occurred
during communication by RS-
232C.
Yes Yes
5
U O A paper jam occurred during
paper feed.
Yes Yes
6
U An abnormal condition
occurred at the cutter.
Yes Yes
7
U O The label has run out. Yes Yes
8 U A f eed or an issue was
attempted with the head
opened.
(except the [FEED] key)
Yes Yes
9
U The thermal head
temperature has become
excessively high.
No Yes
10
O U In writable character or PC - Yes
command save mode
11 U An error has occurred in
writing data into the flash
memory board.
No Yes
12
U An erase error has occurred
in formatting the flash
memory board.
No Yes
13
U Saving failed because of the
insufficient capacity of the
flash memory card.
No Yes
14
U U The flash memory board is
being initialized.
(Initialization is carried out for
approximately 15 seconds)
– –
15
U An EEPROM for back-up
cannot be read/written
properly.
No No