Toshiba GC10-QM, B-SV4D-GS manual Clear Area Command ESC XR

6.3.5 CLEAR AREA COMMAND [ESC] XR

Function

Format

Term

Explanation

Clears the designated area or reverses the white/black dot pattern in the designated area in the drawing area.

[ESC] XR; aaaa, bbbb, cccc, dddd, e [LF] [NUL]

aaaa:Designated area start point X-coordinate Fixed as 4 digits (in 0.1 mm units)

bbbb:Designated area start point Y-coordinate 4 or 5 digits (in 0.1 mm units)

cccc:Designated area end point X-coordinate Fixed as 4 digits (in 0.1 mm units)

dddd:Designated area end point Y-coordinate 4 or 5 digits (in 0.1 mm units)

e:Type of clear

A:Clears the contents in the designated area to zeros.

B:Reverses the white/black dot pattern in the designated area.

Backing paper

Origin of

coordinates

(0, 0)

Start point

Effective

print length

End point

Label Label

End point

Effective print length

Start point

Origin of coordinates

(0, 0)

		Effective			Effective
0	X	print width			print width
					Y
		Paper feed direction			Paper feed direction
Y
			X	0
[Print direction: Printing bottom first]				[Print direction: Printing top first]

Notes

(1)The result is the same even if the start and end point coordinates are reversed.

(2)The result is the same even if the start and end point coordinates are set to an upper right and a lower left points, respectively.

(3)The start and end coordinates of the designated area must be set within the effective print area set by the Label Size Set Command ([ESC] D).

- 29 -