Platen/Sensors, Cover | Toshiba B-SV4D specs

3. MAINTENANCE

ENGLISH VERSION EO1-33061

3.1 Cleaning

3.1.2 Platen/Sensors	1.	Wipe the Platen with a soft cloth moistened with alcohol.
	2.	Remove dust or paper particles from the Media Sensor and Cover

Open Sensor using an air blower.

Cover Open

Sensor

Media Sensor

3.1.3 Cover

CAUTION!

Do not use any volatile solvents including thinner and benzene, as this may cause discoloration or distortion of the cover.

Platen

Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth slightly moistened with water.

E3- 2

Image 23

Toshiba B-SV4D owner manual Platen/Sensors, Cover

Contents

SV4D Series Vorsicht CE Compliance for EU only SV4D Series Meanings of Each Symbol Safety Summary Precautions Table of Contents Product Overview Introduction Features UnpackingAccessories SVT H05VV-F When purchasing the power cord Front View Rear View DimensionsAppearance Interior Button and Indicator Lamp Precautions Printer Setup Turning on the Printer Procedure before OperationTurning the Printer Turning OFF the Printer Connecting the Cables to the Printer Connecting the Power Adapter and the Power Cord Loading the Media Media Guide Adjustment Knob Strip mode Option External Media Roll Hanger Option Media Sensor Calibration Test, and Dump Mode different type UtilitiesSelf Print Test and Dump Mode Media Sensor Print test label sample E2-11 Print Head MaintenanceCleaning Cover Platen/Sensors Care/Handling of the Media Removing Jammed Media TroubleshootingTroubleshooting Guide A1.1 Printer Appendix 1 Specifications A1.3.1 Media Type A1.2 OptionsA1.3 Media A1.3.3 Detection Area of the Reflective Sensor A1.3.2 Detection Area of the Transmissive Sensor Figure below shows the effective print area on the media A1.3.4 Effective Print Area Interface Cables Appendix 2 Interface Bar code Glossaries Index Index EO1-33061A