Toshiba B-SV4D owner manual Product Overview, Introduction Features Unpacking, Accessories

1. PRODUCT OVERVIEW

ENGLISH VERSION EO1-33061

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TOSHIBA B-SV4D series barcode printer. This Owner’s Manual contains valuable information from general set-up to confirming the printer's operation using test prints. You should read it carefully to help you gain maximum performance and life from your printer. This manual should be kept close at hand for everyday reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features

1.3 Unpacking

NOTES:

This printer has the following features:

•This printer is equipped with a 32-bit RISC processor, which offers up to 5 inches/sec. print speed.

•A standard USB interface for convenient label printing connectivity.

•A 10/100T Base LAN connector is standard on the GS12 model.

•The clamshell design and moveable media sensor enable easy media loading and use of a wide range of media.

•All frequently used bar code formats are available in this printer. Fonts and bar codes can be printed in any rotation.

•This printer provides a choice of six different type faces of alphanumeric font, and outline font printing capability.

•The GS type is designed for batch issue and the GC type is for cut issue. Fitting the optional cutter unit to the GS type enables cut issue.

•This is the most cost-effective and high performance printer in this class.

Unpack the printer as per the Unpacking Instructions supplied with the printer.

1.Check for damage or scratches on the printer. However, please note that TOSHIBA TEC shall have no liability for any damage of any kind sustained during transportation of the product.

2.Keep the cartons and pads for future transportation of the printer.

1.4Accessories

When unpacking the printer, please check that the following accessories are supplied with the printer.

CD-ROM (1 copy) Power Adapter (1 pc.)

Media Shaft (1 pc.) Media Holder (2 pcs.)

Media Holder Spacer (2 pcs.)

E1- 1