Toshiba B-SV4D owner manual A1.3.4 Effective Print Area

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33061 A1.3 Media

A1.3.4 Effective Print Area

The figure below illustrates the relation between the head effective print width and media width.

Out of print range		Print head element		Out of print range
		108.0 mm±0.2mm
2 mm	(Head Effective Print Range)		2 mm

112.0 mm (Max. media width)

The figure below shows the effective print area on the media.

Start line

1.5mm from the left edge of media

1mm

Guaranteed print area

1mm

1.5mm from the right edge of media

Media feed direction

Media width

(Backing paper width is not included.)

NOTES:

1.Be sure not to print on the 1.5-mm wide area from the media edges (shaded area in the above figure).

2.The centre of media should be positioned at the centre of the print head.

3.Print quality is not guaranteed within 3 mm from the print head stop position (including 1-mm slow-up.)

4.Average print (black) rate should be 15% or less. For bar code print area, the print rate should be 30% or less.

5.Line weight should be 3 to 12 dots.

EA1- 4